How to Alter Flare Pants to Straight Leg
Are you tired of your flare pants not fitting quite right? Do you wish to transform them into stylish straight-leg trousers? If so, you’re in luck! Altering flare pants to straight-leg is a simple and cost-effective way to update your wardrobe. In this article, we will guide you through the process of altering flare pants to straight-leg, ensuring a perfect fit and a new look for your favorite pair of pants.
Materials Needed
Before diving into the alteration process, gather the following materials:
– Seam ripper
– Scissors
– Pins
– Iron
– Straight-leg pants (optional, for reference)
– Measuring tape
Step 1: Take Measurements
Begin by taking measurements of the flare pants you wish to alter. Measure the inseam, the width of the hip, and the desired width of the straight-leg pants. It’s essential to have these measurements to ensure a perfect fit after the alteration.
Step 2: Mark the Cutting Line
Using a measuring tape and a fabric marker, mark the cutting line on the flare pants. Start from the crotch seam and extend down the inseam to the desired length of the straight-leg pants. Make sure the cutting line is straight and even.
Step 3: Remove the Excess Fabric
Using a seam ripper, carefully remove the side seams of the flare pants. This will expose the inseam. Now, cut along the marked cutting line, removing the excess fabric from the flare area. Be sure to leave a 1/4-inch seam allowance.
Step 4: Sew the Side Seams
After removing the excess fabric, fold the cut edges to the inside and pin them in place. Sew the side seams, ensuring a straight and even stitch. This will create the straight-leg silhouette.
Step 5: Hem the Pants
Now it’s time to hem the pants. If the original hem was turned up, fold the new hem down by 1/4 inch and press it. Then, fold it up another 1/4 inch and press again. Pin the hem in place and sew it, leaving a small opening for turning the pants right side out.
Step 6: Turn and Press
Turn the pants right side out and press them with an iron. This will ensure a smooth and crisp finish.
Step 7: Final Adjustments
Give the pants a final check to ensure they fit well and that the seams are straight. If necessary, make any final adjustments to the hem or seams.
Congratulations! You have successfully altered your flare pants to straight-leg. Enjoy your new, stylish pair of trousers and the confidence they bring.
